低压电器的研究与开发 陈德桂科技论文选集2025|PDF|Epub|mobi|kindle电子书版本百度云盘下载

低压电器的研究与开发 陈德桂科技论文选集PDF格式电子书版下载

注意：本站所有压缩包均有解压码： 点击下载压缩包解压工具

第一部分 发展综述1

近期低压电器研发工作的若干动态1

当前国内外低压塑壳断路器发展的动向11

节能减排推动低压断路器向小尺寸、高性能方向发展17

智能电网促进了低压电器新品种的发展与新技术的应用22

讨论和分析近期低压电器的若干新技术29

控制与保护开关电器的进展36

低压电器最新技术发展动态40

交流接触器技术发展动态46

虚拟样机成为开发新型低压电器的关键技术52

面向21世纪的低压电器新技术57

第二部分 低压开关电弧与开断特性64

Numerical Simulation of Arc Motion during Interruption Process of Low-Voltage Circuit Breakers64

低压灭弧系统中产气材料的作用及其选择70

Analysis and Improvement of Linkage Transfer Position for the Operating Mechanism of MCCB75

Effect of Different Vent Configurations on the Interruption Performance of Arc Chamber＊81

两种静导电回路对塑壳断路器开断性能的影响分析86

Experiment and Simulation Research on the Influence of Different Main Contact System on the Interruption Performance of Control and Protective Switch93

Research on Contact Force Pairing of MCCB with Double Repulsive Contact Structure101

利用电弧动态数学模型的低压断路器开断过程仿真分析108

Ferromagnetic Material Effects on Air Arc Behavior115

Effect of Back-Volume of Arc-Quenching Chamber on Arc Behavior122

E1ectrode Evaporation Effects on Air Arc Behavior129

Simulation of Pressure Rise in Arc Chamber of MCCB during its Interruption Process134

A comparison of the effects of different mixture plasma properties on arc motion139

Analysis of the Interruption Process of Molded Case Circuit Breakers146

Study of the Effect of Gassing Material on Arc Behavior in Low Voltage Circuit Breaker154

Study of the Influence of Arc Ignition Position on Arc Motion in Low-Voltage Circuit Breaker160

Experimental Investigation on the Arc Motion with Different Configurations of Quenching Chamber in AC Contactor167

弧柱压降对塑壳断路器限流性能的作用172

Experimental Investigation on Arc Motion of MCCB with Different Configurations of Arc Chamber Using Optical Fiber Measurement System176

Experimental Investigation of the Influence of Several Factors on the Arc Motion of a Model Quenching Chamber with Gas-Driven Arc182

气吹灭弧与压力脱扣技术促进了低压断路器分断性能提高188

3D Dynamic MHD Arc Mathematical Model of Low Voltage Circuit Breakers192

低压断路器的器壁侵蚀与自动气吹灭弧新技术197

Effect of Magnetic Field of Arc Chamber and Operating Mechanism on Current Limiting Characteristics of Low-voltage Circuit Breakers201

低压断路器开断特性的仿真研究208

新型灭弧系统对背后击穿现象的抑制作用213

低压限流断路器背后击穿现象的数值模拟研究217

低压断路器中电弧运动磁流体动力学模型的仿真研究222

低压断路器灭弧室中磁驱电弧的数学模型226

低压断路器电弧背后击穿现象的研究232

栅片灭弧室电场的计算及其对灭弧性能的影响236

双断点断路器的电弧数学模型及开断过程仿真241

Investigation of Back Commutation Phenomena for Narrow Slot Arc Quenching in Current Limiting Circuit Breaker247

低压限流断路器开断过程重击穿现象及防止措施255

电弧运动通道对低压限流断路器开断过程重击穿现象的影响259

The Effect of Self-consistent Magnetic Field on Contact Wear and Interrupting Characteristics of the Small-capacity Contactors266

第三部分 仿真与数字化设计273

不同进线结构与尺寸的MCCB电动斥力与电弧磁吹力的分析274

微型断路器开断过程的数学建模与仿真分析281

三气隙永磁接触器工作原理和静特性分析287

双断点与单断点万能式断路器电动稳定性的分析与对比291

基于磁场和等效磁路的磁通变换器特性仿真和优化设计294

Thermal Analysis of AC Contactor Using Thermal Network Finite Difference Analysis Method301

Analysis and Optimization for the Operating Mechanism of Air Circuit Breaker307

A New Method to Evaluate the Short-Time Withstand Current for Air Circuit Breaker313

Dynamic Simulation of Operating Mechanism for Molded Case Circuit Breaker320

塑壳断路器不同结构触头灭弧系统吹弧磁场的分析326

旋转双断点塑壳断路器机构的动态仿真与优化330

交流接触器触头弹跳的仿真及影响因素334

Analysis and Research on Electro-Dynamic Repulsion Force Acting on the Paralleled Conductors inAir Circuit Breaker341

交流接触器温度场仿真及影响因素的分析347

计及主回路和电磁系统发热的交流接触器数值热分析354

一种分析多连杆永磁操动机构动态特性的方法360

塑壳断路器滑扣现象的仿真分析366

塑壳断路器操作机构分断速度的影响因素372

舰用框架断路器抗冲击动力学建模与仿真376

Investigation on the Dynamic Characteristics of a Magnetic Release in Molded Case Circuit Breaker380

交流接触器E型电磁铁分磁环的仿真设计385

开关柜耐受最大冲击载荷的冲击动力学研究389

3-D Finite Element Analysis and Experimental Investigation of Electrodynamic Repulsion Force in Molded Case Circuit Breakers396

Numerical Analysis and Experimental Investigation of Dynamic Behavior of AC Contactors Concerning with the Bounce of Contacts403

计及物理参数随温度变化时螺管电磁铁温度场和瞬态热路的仿真分析408

电力电子装置施工设计软件系统的面向对象建模413

Analysis of Magnetic Coupled to Mechanical Motion in Solenoidal Electromagnet Excited Voltage Source419

起重电磁铁的计算机辅助优化设计422

第四部分 现代测试技术431

压力测量及其在低压断路器灭弧室优化设计中应用432

Experimental Study of the Influence of Gassing Material on Blow Open Force and Arc Motion436

低压电器中气动斥力的实验研究440

开关柜内部故障电弧的在线检测和保护装置446

Measurement of the Dielectric Recovery Strength and Reignition of AC Contactors451

A Novel Optical Fiber Measurement System of Arc Motion in Molded Case Circuit Breakers457

采用自聚焦透镜的开关电弧运动形态光纤测试系统464

低压断路器中电弧运动形态的观察470

多纵缝灭弧室介质恢复强度的测试与分析473

电弧运动图象的光电数字式测试系统477

中大容量接触器触头斥力的试验研究481

第五部分 智能电器487

Thermal Simulation of a Contactor with Feedback Controlled Magnet System488

Simulation and Analysis for a Permanent Contactor with and without Current-Feedback System495

Analysis and Optimization for a Contactor with Feedback Controlled Magnet System500

低压电器智能化的新技术507

具有屏蔽机壳的电子设备系统级电磁敏感性分析方法513

Dynamic Characteristic Analysis and 0ptimization for the Energy-Saving and Bounce-Reducing Double-Coil Contactor518

磁通变换器的优化设计525

交流接触器的同步控制528

真空断路器关合速度与预击穿对同步关合的影响研究533

基于小波变换的配电网电压暂降的干扰源辨识538

智能电器与电力质量监控545

交流接触器通断过程的智能操作548

可通信低压开关电器551