塑料模具设计技术英语2025|PDF|Epub|mobi|kindle电子书版本百度云盘下载

塑料模具设计技术英语PDF格式电子书版下载

注意：本站所有压缩包均有解压码： 点击下载压缩包解压工具

Chapter 1　General mould construction　基本模具结构1

1.1 Basic Terminology　基本术语1

1.2 Integer cavity and core plates　整体式型腔和型芯板5

1.3 Use of local inserts　局部镶块的使用7

1.4 Inserts for cavity and core　型腔和型芯镶块12

1.5 Types of guide pillars and guide bushes　导柱和导套的形式18

1.6 Sprue bush　浇口套25

1.7 Register ring　定位圈28

Chapter 2 Parting surface　分型面34

2.1 Flat parting surface　平面分型面34

2.2 Non-flat parting surface　非平面分型面37

2.3 Relief of parting surfaces　分型面的释放40

2.4 Venting　排气44

Chapter 3 Ejection system　顶料系统46

3.1 Removing the molding　塑件的取出46

3.2 In-line Ejector grid　内嵌顶料架47

3.3 Ejector plate assembly　顶料板组合51

3.4 Ejector plate　顶料板57

3.5 Retaining plate and stop pins　固定板和挡钉60

3.6 Ejector plate assembly returns systems　顶料板回程机构62

3.7 Ejection Techniques　顶料方法66

3.8 Pin ejection　顶杆顶料72

3.9 Stepped ejector pins　阶梯形顶杆76

3.10 Sleeve ejection　顶管顶料78

3.11 Stripper plate ejection　顶板顶料83

3.12 Sprue pullers　主流道拉料杆86

3.13 The B sprue pullers B　型主流道拉料杆89

Chapter 4 Feed system　浇注系统93

4.1 Runner　分流道93

4.2 Runner cross section shape　分流道截面形状95

4.3 Runner size　分流道尺寸100

4.4 Runner layout　分流道布置103

4.5 Gates　浇口109

4.6 Positioning of gate　浇口的位置111

4.7 Sprue gate　主流道型浇口115

4.8 Rectangular edge gate　矩形浇口117

4.9 Round edge gate　圆浇口122

4.10 Overlap gate　叠合式浇口124

4.11 Fan gate　扇形浇口125

4.12 Tab gate　护耳式浇口128

4.13 Diaphragm gate　叠合式膜状浇口129

4.14 Ring gate and film gate　环形浇口和膜状浇口132

4.15 Pin gate　点浇口134

4.16 Subsurface gate　潜伏式浇口137

4.17 Winkle gate　螺肉形浇口141

Chapter 5 Mould temperature control　模具温度控制146

5.1 Mould cooling　模具冷却146

5.2 The cooling of shallow integer type cavity　整体式浅腔的冷却149

5.3 The cooling of deep integer type cavities　整体式深腔的冷却153

5.4 Cooling integer type core plate　整体式型芯板的冷却156

5.5 Cooling insert bolster　镶块板的冷却158

5.6 Cooling rectangular cavity inserts　矩形型腔镶块的冷却160

5.7 Cooling circular cavity inserts　圆形型腔镶块的冷却163

5.8 Cooling shallow core inserts　浅型芯镶块的冷却167

5.9 Cooling deep core inserts　深型芯镶块的冷却169

5.10 The helical cooling channel design of deep core insert　深型芯镶块的螺旋冷却槽设计171

5.11 Baffled hole system design of deep core insert　深型芯镶块带隔板孔的冷却系统174

5.12 Heat rods of deep core insert cooling　深型芯冷却用的热杆176

5.13 Heat pipe of deep core insert cooling　深型芯冷却用的热管178

5.14 Cooling of valve ejectors and sprue bush　阀形顶杆和主流道衬套等的冷却183

5.15 Various baffles and plugs　各种隔板和堵头185

5.16 Water adaptors　水接头189

5.17 Seals and O rings　防漏和O型密封圈193

Chapter 6 Standard parts systems　模具标准件系统196

6.1 Using standard mold components　模具标准件的使用196

6.2 Standard two-part mold base systems　基本的标准两板模具系统197

6.3 Advantages and limitations of standard mold units　标准模架的优点和局限200

6.4 DME standard mold system DME　标准模具系统203

6.5 HASCO standard mold system HASCO　标准模具系统207

6.6 Standard accessory components　标准辅件211

6.7 Standard accessory cooling components　标准冷却辅件213

6.8 HASCO Positive locking actuator HASCO　刚性锁紧器214

6.9 DME slide retainer DME　滑块定位器217

6.10 Finger cams　斜导柱219

6.11 Other accessory standard components　其他标准辅件220

6.12 Standard parts systems Comparative terminology　标准件术语对比224

Chapter 7 Purchasing order　模具采购合同225

7.1 Request for quote　询价单225

7.2 Quotation　报价单227

7.3 Sales contract or purchase order　销售或购买合同229

7.4 Technology agreement　技术协议233

7.5 Thermosetting injection mold technology agreement　热固性塑料模具技术协议240

7.6 Packing list　装箱单245

Chapter 8 Mould design technology documents　模具设计技术文本247

8.1 Introduction of mould design technology document　模具设计技术资料概述247

8.2 Tooling standard　模具标准248

8.3 Check list for pre-design　初级设计检查表250

8.4 Check list for full design　详细设计检查表252

8.5 Mold Tryout check list　试模检查表253

8.6　Mold acceptance check list　模具验收检查表256

8.7　Procedure maintenance of mold　模具的维护保养规程259

8.8　Procedure of mold assembly and disassembly　模具装拆规程261

8.9 Spare parts list,Steel certificate and Heat Treatment　备件清单材料质保书和热处理证书263

References　参考文献267